Output shaft pinion specification table
　

Model
Module
The teeth number of output pinion
Output shaft
Diameter. x Length
LK-S-0.25A
LK-S-0.4A
< 1 >
M3
 (11T)
 
M3
 (9T)(10T)(11T)
M3.5
 (8T)(9T)(10T)
M4
 (7T)(8T)
LK-H-0.4A
LK-R-0.75A
< 2 >
M3
 (10T)(11T)(12T)(13T)(14T)(15T)(16T)(18T)
24 x 77L
(key:7 x 7 x 75L)
M3.5
 (9T)(10T)(11T)(12T)(13T)(14T)(15T)(16T)
M4
 (8T)(9T)(10T)(11T)(12T)(13T)
M5
 (7T)(8T)(9T)(10T)
LK-0.4A
LK-0.75A
LK-HR-0.75A
< 3 >
M3
 (13T)(14T)(15T)(16T)(18T)
30 x 77L
(key:8 x 8 x 75)
M3.5
 (10T)(11T)(12T)(13T)(14T)(15T)(16T)(19T)
M4
 (9T)(10T)(11T)(12T)(13T)
M5
 (8T)(9T)(10T)
LK-S-0.75A
LK-H-0.75A
LK-R-1.1A
< 4 >
M3
 (13T)(15T)(16T)(18T)
30 x 77L
(key:8 x 8 x 75L)
M3.5
 (11T)(12T)(13T)(14T)(15T)(16T)
M4
 (9T)(10T)(11T)(12T)(13T)(14T)
M5
 (8T)(9T)(10T)(11T)


　

*The pinion except headword with ( ),other pinion and output shaft are separate.
*The normal width of pinion is 70 mm, and the extending width of pinion is 90mm.
*Red headword: Besides the normal width of pinion ,the extending width of pinion.
*blue headword: The width of pinion is 20 mm.